
CCTV SURVEILLANCE PRODUCTS
Part No.
WT2-ODA15
2.4GHz Omni Directional Antenna
15dbi
15dbi omni-directional 2.4GHz antenna designed
to radiate radio-frequency energy equally in all
directions for widespread and all-point wireless
deployment. This antenna is especially useful for
optimizing coverage when you want to place your
wireless access point or router out of plain view- in a
wiring closet or above a ceiling pad.
Key Features
- Radiates radio-frequency energy equally in all
directions for widespread and all-points wireless
communications
- SWR 1.3:1 max, high performance antenna
design
- Made with weatherproof and corrosion-resistant
material
- Each package comes with a pole mounting kit for
immediate outdoor installation
- Available in 9, 12, and 15 dBi gain
Part No.
WT2-PA21
2.4GHz Panel Antenna 21dbi
21dbi panel directional antenna deliver extended
wireless access point range in a single fl oor
environment with the antenna, ideally, secured at
a corner of the building fl oor. These antennas can
also be used for a point-to-point network so that
wireless connections can be achieved with LANs
between buildings in a campus-type environment
or between two remote areas. Finally, they provide
multi-fl oor transmission when placed on a ceiling, as
the higher power output extends the range through
typical fl ooring materials. Our antenna package
includes several mounting options, such as fi xed,
wall-adjustable, and pole.
2.4GHz Sector Antenna 21dbi
21dbi Sector Directional Antenna comprised
of a professional quality “cell site” base station
antenna and are designed primarily for carrier-
class applications and service providers using the
2.4 GHz ISM band. The antennas are packaged
with a directional orientation bracket that makes
the main beam width and angle adjustable when
an antenna is installed on the top of a mountain,
radio tower or high-rise building. This feature offers
maximum signal strength for both reception and
transmission in the desired area. In addition, the
directional characteristic allows the user to adjust
the transmitting and receiving angle of their antenna
and is designed specifi cally for outdoor building-to-
building application with buildings of various height.
Part No.
WT2-SA21
Part No.
WT5-MAPNFC
5.8GHz Wireless Transmission
Multi Access Point With N-Type
Female Antenna Connector
This 5.8GHz long range outdoor wireless bridge and
is an ideal outdoor wireless backhaul solution. It is
protected by an IP68 certifi ed die-cast all weather
housing and lightning protector. It is designed for
a wide variety of outdoor applications and can be
deployed as point-to-point and point-to-multipoint
solutions. The WT5-MAPNFC is an ideal backhaul
solution due to its low cost, superior performance,
range, ease of installation and management.
It offers two data rates, based on the IEEE 802.11a
mode and the IEEE802.11a turbo mode. When the
bridge operates under the IEEE 802.11a mode, it
supports data rates from 6 Mbps to 54 Mbps. Under
the IEEE802.11a turbo mode, it supports data rates
from 12 Mbps to 108 Mbps. The frequency channel
for the IEEE802.11a and the IEEE802.11a turbo are
across from 5.15 to 5.85 GHz
Part No.
WT2-GA24
2.4GHz Grid Antenna 24dbi
Main Features
- Simple to install and aim
- Low mast and wind loading
- Surface-treated, corrosion resistant aluminium
alloy grid refl ector
- Vented, weatherproof feed housing
- Durable solid brass feed (not PCB)
- Good multi-path interference rejection
- Excellent front to back ratio
- Supplied with mounting hardware for attaching to
mast or tower member
- Designed and manufactured in Australia
- 24-month warranty
2.4GHz Directional Antenna 18dbi
N type female connector
For external use
For 15-2400 cameras and receivers
Size: 360 x 220 x 40mm
Weight: 1500g
UVB resistant
Part No.
VS15-2400AP18
WIRELESS TRANSMISSION 5.8GHZ
Kommentare zu diesen Handbüchern